Delta NT
Delta NT
Delta NT
Delta NT
Record detailed vehicle studies in
heavy traffic, simple axle volumes, or anything in between
This is our most versatile data collector. Four sensor inputs support all of our road tube layouts. That includes a four-tube configuration that can separate and classify vehicles in adjacent lanes at high volume locations. And it’s all inside a durable sheet metal case that won’t weigh you down.
​
Get Started with Confidence
Record detailed vehicle studies in
heavy traffic, simple axle volumes, or anything in between
This is our most versatile data collector. Four sensor inputs support all of our road tube layouts. That includes a four-tube configuration that can separate and classify vehicles in adjacent lanes at high volume locations. And it’s all inside a durable sheet metal case that won’t weigh you down.
​
Get Started with Confidence
Record detailed vehicle studies in
heavy traffic, simple axle volumes, or anything in between
This is our most versatile data collector. Four sensor inputs support all of our road tube layouts. That includes a four-tube configuration that can separate and classify vehicles in adjacent lanes at high volume locations. And it’s all inside a durable sheet metal case that won’t weigh you down.
​
Get Started with Confidence
Record detailed vehicle studies in
heavy traffic, simple axle volumes, or anything in between
This is our most versatile data collector. Four sensor inputs support all of our road tube layouts. That includes a four-tube configuration that can separate and classify vehicles in adjacent lanes at high volume locations. And it’s all inside a durable sheet metal case that won’t weigh you down.
​
Get Started with Confidence
When you turn the counter on, the LCD screen displays the battery voltage and the date and time on the counter clock. If everything looks right, just press the Start button twice to start recording. A message on the screen will confirm it has started. The counter can also be configured to remind you to attach your GPS device if the site coordinates have not been entered yet.
When you turn the counter on, the LCD screen displays the battery voltage and the date and time on the counter clock. If everything looks right, just press the Start button twice to start recording. A message on the screen will confirm it has started. The counter can also be configured to remind you to attach your GPS device if the site coordinates have not been entered yet.
When you turn the counter on, the LCD screen displays the battery voltage and the date and time on the counter clock. If everything looks right, just press the Start button twice to start recording. A message on the screen will confirm it has started. The counter can also be configured to remind you to attach your GPS device if the site coordinates have not been entered yet.
When you turn the counter on, the LCD screen displays the battery voltage and the date and time on the counter clock. If everything looks right, just press the Start button twice to start recording. A message on the screen will confirm it has started. The counter can also be configured to remind you to attach your GPS device if the site coordinates have not been entered yet.
Save the Layout on the Spot
Save the Layout on the Spot
Save the Layout on the Spot
Save the Layout on the Spot
It isn’t necessary to program the Delta NT before a study. Details about the site and how the data was recorded can be entered from your field notes later using the VIASsoftware. But it is also very easy to tell the counter how the tubes have been laid out so that can be saved with the file. Before starting the counter, switch to LED mode and use the Select button to choose the diagram that matches your tube layout. Sensor spacing measurements must still be entered later.
It isn’t necessary to program the Delta NT before a study. Details about the site and how the data was recorded can be entered from your field notes later using the VIASsoftware. But it is also very easy to tell the counter how the tubes have been laid out so that can be saved with the file. Before starting the counter, switch to LED mode and use the Select button to choose the diagram that matches your tube layout. Sensor spacing measurements must still be entered later.
It isn’t necessary to program the Delta NT before a study. Details about the site and how the data was recorded can be entered from your field notes later using the VIASsoftware. But it is also very easy to tell the counter how the tubes have been laid out so that can be saved with the file. Before starting the counter, switch to LED mode and use the Select button to choose the diagram that matches your tube layout. Sensor spacing measurements must still be entered later.
It isn’t necessary to program the Delta NT before a study. Details about the site and how the data was recorded can be entered from your field notes later using the VIASsoftware. But it is also very easy to tell the counter how the tubes have been laid out so that can be saved with the file. Before starting the counter, switch to LED mode and use the Select button to choose the diagram that matches your tube layout. Sensor spacing measurements must still be entered later.
Easily Monitor Study Progress
Easily Monitor Study Progress
Easily Monitor Study Progress
Easily Monitor Study Progress
During a long study, it’s a good idea to visit the site periodically to make sure everything is still in place and working. LED lights let you quickly see whether every sensor is still recording hits. The LCD screen shows even more information. You can check the battery voltage or see how many strikes have been recorded by each sensor. Strike totals for the first 24 hours only and the entire study are displayed.
During a long study, it’s a good idea to visit the site periodically to make sure everything is still in place and working. LED lights let you quickly see whether every sensor is still recording hits. The LCD screen shows even more information. You can check the battery voltage or see how many strikes have been recorded by each sensor. Strike totals for the first 24 hours only and the entire study are displayed.
During a long study, it’s a good idea to visit the site periodically to make sure everything is still in place and working. LED lights let you quickly see whether every sensor is still recording hits. The LCD screen shows even more information. You can check the battery voltage or see how many strikes have been recorded by each sensor. Strike totals for the first 24 hours only and the entire study are displayed.
During a long study, it’s a good idea to visit the site periodically to make sure everything is still in place and working. LED lights let you quickly see whether every sensor is still recording hits. The LCD screen shows even more information. You can check the battery voltage or see how many strikes have been recorded by each sensor. Strike totals for the first 24 hours only and the entire study are displayed.
Incorporated
Sensor Corrector
Attaching the road tubes to the right sensors is important for many layouts. So what do you do if they were accidentally set up backwards? Instead of recording the study again, our Sensor Corrector utility can switch the tubes in the data.
​
The program can switch the sensor associations in all kinds of TimeMark traffic data files:
​
-
Time stamped road tube sensor strikes
-
Manual count board button events
-
Counter-processed axle volume
-
RDF files created by any version of VIAS or TMPad for Windows
-
CDF files uploaded to memory sticks from NT series counters
-
JDF files from TMWin and TMPad for Palm
​
After you select the correct sensors, the changes are saved in a new file.
Note: Files saved by version 2.x of the Sensor Corrector can only be read by VIAS 2.
​
The utility is included in the current VIAS installer. If it wasn’t chosen during installation, you can install it later by modifying TimeMark VIAS 2 in the Control Panel’s installed programs list. Then purchase a license (separate from VIAS) to unlock the program. Contact TimeMark Sales for pricing or to buy a license.
